iGuzzini BX04 — Floodlight designed to use Neutral White COB LED lamps with a flood optic

Product information

Floodlight designed to use Neutral White COB LED lamps with a flood optic. Can be installed at ground level, on walls (using screw anchors) and on pole mounting systems. The luminaire consists of an optical assembly/component-holding box and hidden fixing bracket. The optical assembly and front frame are made of die-cast aluminium alloy painted with a smooth finish (grey RAL 9007) or a textured finish (white RAL 9016). The painting process includes a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The next painting stage consists of a primer and a liquid acrylic paint, cured at 150°, with a high level of weather and UV ray resistance. The tempered sodium-calcium glass cover has customised serigraphy, is 4mm thick, and joined to the frame with silicone. The frame is fastened to the optical assembly by two M5 AISI 304 stainless steel captive screws and a galvanised steel safety cable. The product comes complete with a neutral white colour, monochrome COB LED circuit, an optic with a 99.93% super-pure aluminium OPTIBEAM reflector with a polished, anodized surface and built-in electronic ballast. The component-holding box, in the rear of the luminaire, is set up to hold the control gear, which is fixed with captive screws on a galvanised steel pull-out plate. The control gear can be accessed through the rear door made of painted aluminium alloy, fixed to the product body with four M5 AISI 304 stainless steel captive screws and a safety cable. iPro can be adjusted +95°/ -5° relative to the horizontal line using a bracket made of extruded aluminium, on which a graduated scale (with 15° steps) is marked using serigraphy. The internal silicone seals guarantee watertightness IP66h Set up for pass-through wiring using a double M24x1.5 nickel-plated brass cable gland (suitable for cables with 7÷16mm diameter). All external screws used are made of A2 stainless steel. The luminaire technical characteristics conform to EN60598-1 standards and particular requirements.

Technical specifications

Manufacturer reference: BX04 Product scope: Manufacturer reference with finish options; confirm the required configuration when ordering. General (mm): 132x132x140 Material: Aluminium lm system: 1386.81 W system: 13.6 lm source: 1900 W source: 12 Luminous efficiency - lm/W (system value): 101.97 Maximum intensity (cd): 2620 Total light flux at or above an angle of 90° (Lm): 0 Light output ratio (LOR): 73 Optic and beam angle: F - Flood 40° Adjustability: directional Light colour quality: CRI 82 - Rf (Colour Fidelity Index) 85 - Rg (Gamut Index) 95 Colour temperature: 4000 K MacAdam Step: 2 Lifetime LED 1: >100,000h - L80 - B10 (Ta 25°C) Lifetime LED 2: >100,000h - L80 - B10 (Ta 40°C) Operating ambient temperature range (C°): from -20°C to +35°C. Electrical supply: 220-240 VAC ZVEI code: LED Power Supply: Electronic Control gear included Mounting options: Integral Mounting: Surface mounted, Ground surface, Wall surface, Ground anchored, Ground spike, Ceiling surface, U-bracket Wiring: Luminaire with electronic control gear 220 ÷ 240V ac, 50/60 Hz. Manufacturer finish options: White; Grey Product image: Manufacturer-assigned representative image. The source reference may offer multiple finishes or configurations; confirm the selected option when requesting a quotation. Manufacturer / product source: https://www.iguzzini.com/en/bx04/

Product enquiries

This is a summary of the information published by VIRTUS TECH, not a manufacturer datasheet. Contact info@virtustech.al for availability, pricing and the manufacturer’s current technical documentation.

virtustech.al/en/products/iguzzini-bx04-6dd883c3b395ca71d586dcc6